Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Lakewood?
Panel replacement in Lakewood typically costs $250 to $500 for a single damaged section, and the written estimate sets the final price. Most jobs land in that range because a garage door is built from stacked sections, so we usually replace one or two panels rather than the whole door. If a car has backed into the door or a stray branch has punched through a section, a panel swap is often the least expensive way to get the door closing properly again.
That’s a different job from panel replacement on a door that’s rusting out or sagging at the seams, where several sections may need to come out at once. Either way, we diagnose before we quote. Call (888) 287-5235 and we’ll set up a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical Lakewood panel replacement runs $250 to $500 for the damaged section, with the estimate confirming the number.
- Single-panel swaps usually cost less than half of a full garage door repair job that involves the opener or track.
- Panel prices depend on width, material, insulation and whether the color still matches your door’s existing run.
- Repair first: if the panel is dented but the door still runs true, we look at whether a smaller fix makes sense before we quote new sections.
- Free estimates, and a written estimate sets the final price.
Panel Replacement Cost Breakdown (2026)
Here’s how the line items break down for a typical panel replacement in the Lakewood market. These are estimated ranges, not a menu: your door, its brand and the condition of the surrounding panels all shift the number, and the written estimate is the price you pay.
| Line Item | Typical Estimated Range |
|---|---|
| Single steel panel (standard width, non-insulated) | $250 – $380 |
| Single insulated panel (Clopay, Amarr, Wayne Dalton, Raynor) | $320 – $500 |
| Two-panel replacement (matched upper and lower sections) | $450 – $700 |
| Panel plus track adjustment or re-hang | $370 – $620 |
| Panel plus roller replacement on the affected sections | $340 – $570 |
| Color mismatched factory section (special order) | $380 – $620 |
A few things push a Lakewood panel job toward the top of the range and a few pull it down. Insulated panels cost more than bare steel because the core has to be cut to the right dimensions and the section has to seal properly against the weather. A special order in an out-of-production color adds lead time and usually a small premium. A simple dent on a flat steel panel with no track damage sits comfortably at the low end. If the door is running rough, though, a panel alone won’t fix it. A bent track or a worn roller can make a brand new section jam in the opening, so those get quoted alongside the panel when we see them. If you’re looking at a bigger failure, our page on garage door repair covers the full-job ranges.
Related work is often bundled into the same visit so you’re only paying for one trip. Here’s how the neighboring jobs typically price out:
- Panel replacement: $250 – $500
- Cable repair: $130 – $250
- Track realignment: $120 – $240
- Roller replacement: $110 – $220
- Garage door repair (broader scope): $150 – $600
If your opener is dragging or the remote is unreliable, that’s a separate fix: opener repair runs $120 – $320, and full opener installation is $250 – $550. A whole new door, if the panels are beyond saving, sits at $700 – $2,200 for installation.
What Affects Panel Replacement Pricing in Lakewood
Two doors on the same block can price differently. Here’s what moves the number up or down in Lakewood specifically.
- Door brand and section design. Clopay, Amarr, Wayne Dalton, Raynor and other major makes all cut their panels to different profiles, so a panel replacement has to match the door’s exact channel. The brands we work with most often (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, Raynor) mean we can source common sections without a special order delay. Rare profiles cost more and take longer.
- Insulation and material. Single-layer steel panels are the least expensive to replace. Insulated panels, wood-clad and carriage-style sections cost more because the fit has to preserve the door’s balance and appearance. A heavier replacement section can also change how the springs need to be tuned, which we check on every job.
- Number of damaged sections. One section is one set of costs. Two adjacent sections seldom come out without the ones above and below getting touched, so a two-panel job is priced per section. We tell you exactly how many sections the door needs before we start.
- Color and finish matching. Factory colors fade over time in the sun, and a new panel can look slightly different from the sections already on your door. If an exact match matters, we can source a factory-color section, which typically adds cost over a standard-order panel. If you live with a close match, you save. Neither option affects how the door works.
- Other damage surfaced during the visit. A door that took a hit often hides bent rollers, a slightly bowed track or a loose hinge right next to the damaged panel. Lakewood winters bring freeze-thaw cycles that work on door hardware, and a door that was already stiff before the impact shows it after. We quote repair for those parts only if they actually need it.
- Opener condition. A damaged panel plus a strained opener is a common pair. When the bottom section catches, the opener can get pulled out of balance and start cycling oddly. If your opener needs a service, we’ll tell you on the same estimate rather than after the panel swap.
Panel replacement is also a good moment to look at the door’s age. If the paint is chalky, seams are pulling apart, and every section is chipped, a full new installation ($700 – $2,200) can make more sense than replacing two or three sections and coming back for more later. We’ll always show you the repair-first number so you can compare and decide.
Can You Fix a Dented Panel Without Replacing It?
Sometimes, yes. A shallow dent on a flat steel panel can sometimes be pressed back to a point where the door operates normally even if the surface isn’t perfect. What we won’t do is tell you it’s fixed if the panel is creased along an edge, split at a seam, or causing the door to bind. Those panels can’t be straightened safely, and a panel that’s out of alignment puts sideways pressure on the track and rollers, which then wear faster. If you want the door to close flat and seal against the frame, replacement is the honest answer. Call (888) 287-5235 and we’ll look at a photo or come out for a free estimate.
How Long Does a Panel Replacement Take?
Most single-panel replacements take about one to two hours on-site, assuming we have the matching section in hand. A two-panel replacement, or one that also needs track work, generally runs a little longer. Special-order sections are the only real variable: a standard panel in a common brand we can often source quickly, but an out-of-production color or rare profile has to be ordered and scheduled after it arrives. When you call, we’ll tell you what your door needs and give you the arrival and order timeline up front. If the door is jammed and stuck open or closed after damage, we can talk through securing it safely while the panel is on order.
How to Save on Panel Replacement
A few practical moves keep the number down without cutting corners.
- Get the estimate before the trip. A free estimate means you don’t pay for someone to walk the door and quote you. Call (888) 287-5235 and it costs you nothing to know the number.
- Replace only the damaged sections. Don’t let anyone sell you a whole door for one dent. If the surrounding panels are sound, one section does the job. Ask specifically how many sections you’re paying for.
- Take care of the same-visit work together. If the rollers are worn or the track has a slight bow, handling it while the technician is already fixing the panel saves a second visit. It doesn’t add much to the job and it prevents the new panel from wearing in the old hardware.
- Choose a standard factory color if exact matching isn’t essential. Standard colors are cheaper than a special-order run. If your existing door is a common Clopay or Amarr color, the match is usually good enough that you’d be hard-pressed to spot the difference at driveway distance.
- Repair first, replace only if repair doesn’t hold. That’s the approach we take. We’d rather fix a panel today and let you decide on a whole door later than sell you something you don’t need yet.
What to Check Before You Book a Panel Replacement in Lakewood
You’ll get a faster, more accurate estimate if you can tell us a few things when you call.
- Which panel is damaged: the bottom, the top, or a middle section. Look for the seam line on the inside face if you’re not sure.
- The door brand if it’s visible. Check the inside of the panel for a sticker, or look at the opener’s rail label, which often names the system. This is where working on eight major brands matters: we’ll recognize yours and know what fits.
- Whether the door still opens and closes. If it moves freely, panel work can usually be scheduled. If it’s jammed or the opener is grinding, tell us on the call so we can plan around safety.
- Whether the panel has a window or decorative insert. Window panels cost more than flat ones.
If the damage came with a knock to the hardware, listen closely when you open and close the door. A thump, a scrape or a hopping motion near the bottom means the springs and track are also worth checking. Springs are the one part of this system that should never be touched by an untrained hand. A garage door spring under tension holds the full weight of the door, and a worn or rusty spring can release with serious force if it’s not backed off safely. We check springs without touching the mechanism by watching how the door tracks and how much lift it takes to raise it. If a spring is failing, that’s a job for a trained technician. Our spring repair page explains the range.
Should You Repair the Panel or Replace the Whole Door?
Repair wins when the door is structurally sound, the sections are still square, and the only damage is a dent or a broken insert. Replacement wins when the door has widespread rust, several sections are separating, the panels are no longer made, or the door weighs so unevenly that it strains the opener. In the middle, we give you both numbers and explain the trade-off rather than steering you. A panel job at $250 – $500 versus a new door at $700 – $2,200 is a real decision, and the right answer depends on how much life the rest of the door has left. If you’re also planning to upgrade the opener eventually, our opener installation page covers those ranges so you can plan the whole system in one go.
Do Lakewood Homes Have Any Panel Replacement Quirks?
Lakewood has a mix of single-family homes and townhouses, and the doors on a townhouse row often share a common factory style, which usually makes matching a panel easier. Attached garages across town see a lot of winter salt being dragged in on the door, and the bottom panel tends to take the worst of it: splash-back from the driveway over a season can pit the paint on that lowest section faster than anything else on the door. If you’re seeing rusty pin-holes along the bottom edge, that’s usually a bottom-panel job rather than a full replacement, and it’s worth addressing before the rust climbs up the seam. We work on both raised-panel and carriage-style doors, and we carry access to the major brand sections through our supplier network rather than guessing at a fit.
What Happens When You Call
When you call (888) 287-5235, you’ll reach someone who can take the details of your door and get you a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a door fails after the day is over, we’ll book you into the next opening, and if the door is standing open and won’t close, we can talk you through getting it safely secured before the visit. We don’t send a technician without knowing what panel the door needs, so having your brand and damage description ready helps us move straight to the right section.
We’re a garage door specialist, not a general handyman service, and every technician on the job knows the difference between a cosmetic dent and a panel that’s failing structurally. Some of our technicians have up to 8 years of experience working on springs, openers, panels and full doors, and we’re certified across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. When we come out, we look at the door as a system, not just the part you called about, because a new panel on a door with a dragging opener just shifts the problem. Repair first. Replace if repair won’t hold. Then we tell you what it will cost.
FAQs – Panel Replacement Cost
How much does a single garage door panel cost to replace in Lakewood?
A single panel typically costs $250 – $500 to replace in Lakewood, with the written estimate setting the final price. Insulated and window sections sit toward the top of that range. Call (888) 287-5235 for a free estimate.
Is it cheaper to repair a dent or replace the whole door?
Repair is almost always cheaper when the rest of the door is sound: a panel job runs $250 – $500 versus $700 – $2,200 for a new door. Replacement only makes sense when rust, separation or old age means you’d be back for more panels. Call (888) 287-5235 and we’ll quote both so you can compare.
Can you match my existing door color?
Yes, in most cases. Standard factory colors in Clopay, Amarr, Wayne Dalton and Raynor usually match a door that hasn’t faded, and a close match is often indistinguishable from the driveway. An exact-match section in an out-of-production color is a special order and adds to the estimate. Call (888) 287-5235 with your brand and we’ll tell you what’s available.
Will you need to replace more than one panel?
Usually one, sometimes two. Panel damage that reaches the seam tends to spread, and a two-panel replacement typically runs $450 – $700. We inspect the adjacent sections before quoting and tell you exactly how many you’re paying for. Call (888) 287-5235 for a free estimate.
Can you come out today?
Same-day service is often possible, and emergency calls are handled for doors that won’t open or close. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (888) 287-5235 and we’ll find the next opening.
What about opener or spring work while you’re here?
We handle those on the same visit. Opener repair typically runs $120 – $320, opener installation is $250 – $550, and spring repair is $180 – $340 for one spring, with a matched pair costing about twice that. We check the whole system during a panel visit and quote only what actually needs work. Call (888) 287-5235.
Do I need a permit for panel replacement in Lakewood?
Most panel swaps are cosmetic and don’t require a permit, but rules vary by township and by whether the door’s structure changes. Ask Lakewood’s building department before a full door replacement or a change that alters the opening. For panel-only work, the safest call is to check with the town. Our garage door installation page covers the permitting question in more detail.
How do I know if my panel can be repaired instead of replaced?
If the dent is shallow, the door still runs flat and the seam isn’t split, a repair might hold. If the panel is creased along an edge or the door binds in the track, replacement is the safer choice. We’ll look and give you the honest answer. Call (888) 287-5235 for a free estimate.
Pricing reflects the Lakewood market as of 2026. Eldridge Garage Door Repair offers free estimates – call (888) 287-5235.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Rohan Shah"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Rosa Rodriguez"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Paige Sullivan